GAS410 – Organic Solvent Recovery Unit

Inquire product

The GAS410 organic solvent recovery unit is used for spray drying applications requiring organic based solvent solutions.

Safely and effectively spray dry samples using an organic solvent with GAS410 solvent recovery unit. GAS410 is engineered with a highly secure N2 gas sealed circulation system that prevents external discharge of toxic samples. Our cost-effective solvent recovery unit is integrated with a freezer and compressor that eliminates the need for purchasing a separate device. The GAS410 solvent recovery unit supports low temperature drying of heat sensitive materials. Spray drying and recovery of samples are performed with meticulously devised safety measures built into this unit.

  • Dehumidifier (freezer) integrated in GAS410. No extra freezer/dehumidifier equipment needed
  • Compressor included, no need for a separate compressor to operate the ADL311SA when using organic solvent samples
  • Explosion safety with closed loop N₂ inert gas system
  • Recovery of solvent to protect the environment and minimize pollution
  • Drying of easily oxidized materials is possible with this organic solvent recovery unit
  • Supports low temperature spray drying of materials that easily deform with heat
  • No freezing risk due to organic solvent with aqueous solution mixtures which could cause damage to the closed loop GAS410 system
  • - Commercial Food Products
  • - Pharmaceutical Products
  • - Industrial Products
Technical specifications
Solvent recovery system: Capacitor + freezer
Circulating gas: N₂ gas (sealed circulation when connected to ADL311SA or GB-210A)
Circulating volume flow: 0.12 to 0.65m³/min
Compressor (for spraying): Linear compressor integrated
Circulation blower: Roots blower
Solvent recovery container: 2L flask
Freezer: Air-cooled condensation full-sealed type: 400W R404A
Solvent recovery mechanism: Capacitor cooling mechanism
Filter: Cartridge filter
Instruments: Cooling trap temperature display monitor
Filter differential pressure meter (monitor for clogging of filter)
O₂ density display monitor
Blower wind amount adjusting volume
O₂ sensor: Solid electrolyte (Zirconium) limit current type
Pump: For circulation to measure Oxygen
Safety function: O₂ density meter, flammable gas alarm, electric leakage breaker, N₂ gas forced introduction (when removing nozzles)
Exterior dimensions (WxDxH): 700 x 950 x 1,500 mm
Weight: 130 kg
Power supply: (50/60 Hz) rated current AC200 to 240V 5A (15A)
Required N₂ amount: 15 L/h at 0.1 MPa
Included accessories: Set of connection parts, anti-seismic clamps, interface cable, sample gas for gas alarm inspection, 2L flask