DNE Series – Energy Saving Programmable Oven

Inquire product

DNE411 / DNE611 / DNE811 / DNE911

Laboratory Oven is essential for general heating routines from drying food samples to curing microchips.  Lab Oven is one of the fundamental instruments every laboratory should have.

DNE Series is a High performance environment friendly eco-oven that reduces power consumption significantly.

High precision controller allows high performance temperature control and display of CO₂ and power discharge.
Heat tightness and insulation design of the chamber achieves an energysaving rate of about 40% at constant temperature compared to previous models.
Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models.
Program operation with a maximum of 99 steps, 99 patterns repeatable.
Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes.
Data acquisition from internal test device possible because of cable holes.
Easy system upgrade with various option settings.

Safety features:

Standard equipped with various self-diagnostic functions such as independent overheat prevention device, overcurrent circuit breaker, and key lock function.

Applications
  • - Pharmaceutical Industry
  • - Microbiological Culture Research
  • - Cell Culture Research
  • - Industrial Products
Technical specifications
DNE411
DNE611
DNE811
DNE911
System
Forced air circulation
External temp. range
5~35°C
Operating temperature range
Room temp. +20°C to 210°C
Room temp. +15°C to 210°C
Temperature control accuracy
±0.5°C (at 210°C)
Temperature distribution accuracy
±2.0°C (at 210°C)
Temp. gradient*¹
6°C (at 210°C)
8°C (at 210°C)
8°C (at 210°C)
10°C (at 210°C)
Temp. rise time*¹
~60 min.
~70 min.
~45 min.
~60 min.
Interior
Stainless steel
Exterior
Chrome-free electro-galvanized steel plate, chemical-proof baked-on finish
Cable hole
33mm I.D. 1pc. (right side)
Exhaust port
33mm I.D. 2pcs. (top)
33mm I.D. 2pcs. (rear)
Heater
Stainless pipe 1.1kW
Stainless pipe 1.2kW
Stainless pipe 1.2kW x2
Stainless pipe 1.5kW x2
Heat insulation material
Glass wool
Heater Circuit Control
Triac zero-cross control
Fan Type / Fan Motor
Scirocco fan, Capacitor motor / 10W
Capacitor motor / 30W
Capacitor motor / 30W x2
Door
Single swing (left side)
Double doors (from center)
Observation window
Optional
---
Sensor
K-thermocouple double sensor (for temperature control and independent overheat prevention device)
Temperature control
PID Z control by microprocessor
Temperature setting
Digital setting with ▲▼ keys
Temperature display
Green 4 digit LED digital display (top screen) and orange 5 digit LED digital display (bottom screen) (1°C resolution)
Timer / timer resolution
1 min. and 99 Hrs. 59 mins: duration operation, 24 hour setting: time operation
Operation function
Fixed temperature, Program operation (max.99 steps, up to 99 patterns  repeat operationing function), Duration/time select timer operation function (fixed temperature operation, auto-start, auto-stop, quick auto stop, program operation auto start)
Additional functions
Power on and Integration time function (up to 65,535 hours), Calibration  offset, Time display, Display of power consumption, CO2 discharge and heater operation, Power failure return mode, User configuration information
Safety device
Self diagnostic functions (temp. sensor abnormal, Heater disconnection,  SSR- short, Main relay abnormal, Automatic overheating prevention), Key  lock function, Independent overheat prevention, Electric leakage breaker  with over current protection
Earth leakage breaker
Leak Current/Short Circuit/Over-current Protection, Rated Current Sensitivity 30mA
Independent overheat prevention
Set temperature range: 0~250°C
Internal dimensions WxDxH
450×450×450 mm
600×500×500 mm
600×500×1000 mm
1090×500×1000 mm
External dimensions WxDxH
580×646×860 mm
730×696×910 mm
730×695×1660 mm
1220 ×695×1660 mm
Internal capacity
90L
150L
300L
540L
Shelf load capacity
~15 kg/pc.
Shelf rest step number / pitch
11 steps / 30 mm
13 steps / 30 mm
29 steps / 30 mm
29 steps / 30 mm x 2
Power supply (50/60 Hz)
5,5A (no plug, round terminal)
6,5A (no plug, round terminal)
11A (no plug, round terminal)
14A (no plug, round terminal)
Weight
~63kg
~77kg
~92kg
~185kg
Shelfs and Brackets (stainless)
2 pcs. / 4 pcs.
4 pcs. / 8 pcs.
8 pcs. / 16 pcs.